Main feature
● Inside dip cold-junction compensation.
● A USB port is available for configuration.
● Input signal type, programmable temperature range via software.
● Multipurpose RTD TC thermocouple input signal, 2 wire 4-20mA output.
● 12-35V wide power supply range.
● Support 2 wire, 3 wire, 4 wire RTD PT100 / CU50 input, ohm input signal.
● Support all thermocouples input signal, type K, J, T, S, N, R, E, B etc.
● Standard head-Mounting kit.
● Finely translucent outside shell, flame retardant material.
● High performance in withstands bumps, vibrations, external interference, etc.
● In Compatible with all PLCs, temperature controllers, clocks, etc.
● Industrial grade Operating temperature range: -40 to + 85 ℃
Technical Parameters
-Input signal: Thermocouple or 2-Wire RTD, 3-Wire RTD, 4-Wire RTD.
- Output: 2 wires 4-20mA current.
-Reduce output current: 20.3mA
- Power supply: 12-35VDC, 0.2mA excitation current.
- Measurement Accuracy: 0.5% TC input, 0.2% RTD input.
- Drifting temperature: ≤25ppm / ℃ FS
- Excitation current: 0.2 ± 0.01mA
-Load capacity: 250Ωor 500Ω
- Protection circuit: Reverse polarity connection protection.
Programmable software: Yes, Yes USB cable programming, Software configuration (English).
-HART support: No support
- Operating temperature: -30- + 80 ℃
-Storage temperature: -40- + 120 ℃
-Material: PA66
-Installation: M4x2 screw, standard head mounting.
-Size: 44x33x24mm (LxWxH)
