Control System And Farm Monitoring

Control System And Farm Monitoring

Technical details of equipment in the monitoring system:

  • IoT GATEWAY  

Order code

WG3MD-001

Processor

Dual-Core Tensilica LX6 240MHz, RTC, 4 MB SRAM, 4MB SPI.

RS485

 

Wifi

RS485 : MODBUS MASTER (connect : max 8 Slave).

 

Modbus TCP/IP  On Wifi

Digital I/O

·         Incl. DI

·         Incl. DO

Analog input

8xDIO (with Ext up 32DI/32DO).

·         4x DI Protection : Over-Voltage 30VDC.

·         4x DO, Relay, Current 10A, 300W.

4x AI (4 ~ 20mA) ,Protection.

Wi-Fi

Ethernet

Lora

(optional)

3G/GPRS

WIFI     : 802.11b/g/n up 16mbps.

LAN       : Option.

Lora       : Option.

GPRS     : Option.

 

PROTOCOLS

MQTT /SIM/WiFi (Setting), OPC, Kepware,intouch.

Power supply

9~30 VDC.

Working temp

-40 ~ 85°C, humidity 5 ~ 95% RH (no condensation).

 

·         Board PLC FXU3 – 24MR – 6AD – 2DA :

 

·       SCADA software on PC :

 

    

 

P&ID of the system 

·       Control software for monitoring on Smath Phone :

 

For a hydroponic vegetable farm with a large campus, a farm control and monitoring system is needed. Automatic measurement system parameters: temperature, humidity, pH, nutrient solubility ppm, .... Control Pump, valve irrigation, exhaust fan automatically according to the requirements of the farm owner. All data of the parameters are stored and evaluated by the statistical analysis system in the form of data reports or visual graphs.

Bình luận