SR5906

  • SR5906
  • IFM
7,040,061 VND
Application
ApplicationFlow monitoring; Wire monitoring
Electrical data
Operating voltage tolerance [%]-15...10
Operating voltage [V]76.5...264 AC
Nominal voltage AC [V]90...240
Nominal frequency AC [Hz]50...60
Max. power consumption [VA]3.5
Protection classII
Reverse polarity protectionno
Power-on delay time [s]10
Number of channels1
Outputs
Electrical designrelay
Contact rating3 A (250 V AC / 30 V DC); (switching cycles at 3 A load: 100.000; type of switch-off: normally open)
Switching cycles (mechanical)20_Millionen
Switching function flow monitoringoutput switches when flow is present: ON for output function = normally open / OFF for output function = normally closed
Short-circuit protectionno
Overload protectionno
Software / programming
Adjustment of the switch pointpushbutton
Operating conditions
Ambient temperature [°C]-20...60
ProtectionIP 67; (with sensor attached)
Mechanical data
Weight [g]244.5
Materialsstainless steel (1.4404 / 316L); stainless steel (1.4301 / 304); PC; PBT-GF20; EPDM/X; brass
Displays / operating elements
Display
functionLED, bar graph
switching statusLED, orange flash in case of wire break
Electrical connection
ConnectionConnector: 1 x 1/2"

Reliable monitoring of liquids and gases in pipes
For the connection of flow sensors with large immersion depths
For sensors made of ceramics, high-grade stainless steel and titanium
Easy setting of the switch points for quick set-up
LED bar graph for indication of switch point and flow

In applications where it is not possible to use flow sensors with integrated evaluation, sensors are used in combination with evaluation units. Examples include hazardous areas, confined spaces or if flow values are to be indicated in a decentralised manner.
The product range comprises evaluation units for control cabinet installation or local mounting. Depending on the unit, it is possible to monitor flow, temperature and/or wire break. All units indicate the flow by means of an LED bar graph.
The evaluation units for local mounting are connected to the flow sensor directly at the measuring point using an M12 connector.
Sensors and evaluation systems are designed and approved for use in hazardous areas according to the applicable directives.

Model: SR5906

Manufacturer: IFM

Quality: 100% New

Warranty genuine

Documents: CO / CQ, VAT invoice

Bình luận

 Tags: SR5906 ,