Number of inputs and outputs				Number of digital outputs: 2; Number of analogue outputs: 1
Output signal				Switching signal; analogue signal; IO-Link; (configurable)
Electrical design				PNP/NPN
Number of digital outputs				2
Output function				Normally open / normally closed; (parameterisable)
Number of analogue outputs				1
Analogue current output [mA]				4...20, invertible; (scalable)
Short-circuit protection				Yes
Type of short-circuit protection				Pulsed
Overload protection				Yes
Measuring range				-0.05...1 bar -50...1000 mbar -0.73...14.5 psi
Application				Hygienic systems
Media				Viscous media and liquids with suspended particles; liquids and gases
Medium temperature [°C]				-25...125; (145 max. 1h)
Pressure rating				10000 mbar 145 psi
Min. bursting pressure				30000 mbar 435 psi
Vacuum resistance [mbar]				-1000
Type of pressure				Relative pressure
No dead space				Yes
Min. insulation resistance [MΩ]				100; (500 V DC)
Protection class				III
Reverse polarity protection				Yes
Integrated watchdog				Yes
2-wire	Operating voltage [V]			20...32 DC
	Current consumption [mA]			3.6...21
	Power-on delay time [s]			1
	Max. load [Ω]			300
	Step response time analogue output [ms]			45
3-wire	Operating voltage [V]			18...32 DC
	Current consumption [mA]			< 45
	Power-on delay time [s]			0.5
	Max. voltage drop switching output DC [V]			2
	Permanent current rating of switching output DC [mA]			250
	Switching frequency DC [Hz]			125
	Max. load [Ω]			(Ub - 10 V) / 20 mA
	Min. response time of switching output (dAP) [ms]			3
	Step response time analogue output [ms]			7
Measuring range				-0.05...1 bar -50...1000 mbar -0.73...14.5 psi
Set point SP				-48...1000 mbar -0.7...14.5 psi
Reset point rP				-50...998 mbar -0.73...14.47 psi
Analogue start point				-50...750 mbar -0.73...10.88 psi
Analogue end point				200...1000 mbar 2.9...14.5 psi
In steps of				1 mbar 0.01 psi
Response times			Damping for the switching output dAP [s]	0...30
			Damping for the analogue output dAA [s]	0.01...99.99
Ambient temperature [°C]				-25...80
Storage temperature [°C]				-40...100
Protection				IP 67; IP 68; IP 69K
Weight [g]				356
Materials				Stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA
Materials (wetted parts)				Ceramics (99.9 % Al2O3); PTFE; stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4
Display		Display unit		LED, green
		Switching status		LED, yellow
		Function display		Alphanumeric display, 4-digit
		Measured values		Alphanumeric display, 4-digit
Display unit				mbar; kPa; psi; inH2O; mWS; % of the span
Process connection				Threaded connection G 1 external thread Aseptoflex Vario
Connection				Connector: 1 x M12; Contacts: gold-plated

Number of inputs and outputs		Number of digital outputs: 1; Number of analogue outputs: 1
Output signal		Switching signal; analogue signal; IO-Link
Electrical design		PNP
Number of digital outputs		1
Output function		Normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]		2.5
Permanent current rating of switching output DC [mA]		200
Number of analogue outputs		1
Analogue current output [mA]		4...20
Max. load [Ω]		500
Analogue voltage output [V]		0...10
Min. load resistance [Ω]		2000
Short-circuit protection		Yes
Type of short-circuit protection		Thermal, pulsed
Overload protection		Yes
Media		Hydrous coolants; oils; oil-based media; water; media similar to water
Dielectric constant of the medium		≥ 2; (for media with a dielectric constant of 2...20 (e.g. oils), a coaxial pipe is needed for operation)
Cannot be used for		Greases; granulates; bulk material; acids; alkali; heavily foaming media
Medium temperature [°C]		0...80; (90 < 1 h)
Tank pressure [bar]		-1...16
Operating voltage [V]		18...30 DC
Current consumption [mA]		< 80
Power-on delay time [s]		< 3
Protection class		III
Reverse polarity protection		Yes
Weight [g]		384
Probe length L [mm]		100...1600
Protection		IP 67
Materials		Stainless steel (1.4301 / 304); FKM; PBT; PC; PEI; TPE-V; PTFE
Materials (wetted parts)		Stainless steel (1.4305 / 303); probe connection: stainless steel (1.4435 / 316L); PTFE; FKM
Process connection		G 3/4 external thread
Display	Display unit	3 x LED, green
	Switching status	1 x LED, yellow
	Level	Alphanumeric display, 4-digit
	Parameter setting	Alphanumeric display, 4-digit
Accessories (optional)		Probe:, E43203...E43205 / E43207...E43210 Coaxial pipe:, E43211...E43221, E43223, E43224
Connection		Connector: 1 x M12; Contacts: gold-plated

Number of inputs and outputs			Number of digital outputs: 2
Output signal			Switching signal; IO-Link
Electrical design			PNP/NPN
Output function			Normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]			2.5
Permanent current rating of switching output DC [mA]			100
Short-circuit protection			Yes
Type of short-circuit protection			Pulsed
Overload protection			Yes
Media			Hydrous media; liquids; viscous media; powder
Recommended media			Water; hydrous media; oils; oil-based media; powder
Probe length [mm]			153
Tank pressure [bar]			-1...40
Oil, Water:	Medium temperature [°C]		-20...100
	Medium temperature short time [°C]		-20...150; (1 h)
Operating voltage [V]			18...30 DC
Current consumption [mA]			< 50
Protection class			III
Reverse polarity protection			Yes
Ambient temperature [°C]			-20...85
Storage temperature [°C]			-40...85
Protection			IP 68; IP 69K
Weight [g]			321.5
Materials			Stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; PEI; FKM
Materials (wetted parts)			Stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; FKM
Process connection			G 1/2 external thread
Display		Switching status	LEDs, yellow
		Operating status	LEDs, green
Connection			Connector: 1 x M12; Contacts: gold-plated

Software IoT SCADA(Icloud) (249 Sản phẩm)